From 32c4e5a571ffcc68bd9fd942207da36d3773bde4 Mon Sep 17 00:00:00 2001 From: paspo Date: Mon, 4 Nov 2019 21:31:32 +0100 Subject: [PATCH] docs!!! --- README.md | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/README.md b/README.md index 72fb8fd..d6efdbb 100644 --- a/README.md +++ b/README.md @@ -37,7 +37,7 @@ Power on the raspberry with the microSD card you just created and wait a minute Disconnect all the cables from your brand new Sonoff-mini, open it and insert the "DIY jumper" in the proper place. Close it, reconnect the wires and power it on. -In 2-3 minutes you should see a new wifi called "SONOFF-xxxx". +In 2-3 minutes you should see a new wifi called "SONOFF-xxxx", this is created by the newly-tasmotized sonoff-mini. ## info on sonoff DIY mode When you enable the "DIY mode" for a sonoff, you should create a new wireless network called "sonoffDiy" with password "20170618sn", the sonoff connects with that network and you have the possibility to flash a different firmware using the "itead diy tool". @@ -75,4 +75,4 @@ Everything is cleared at each reboot as the whole system is running from RAM. If ## current limitations As of today, this is a very basic script. It has never been tested with two sonoff-mini at the same time, for example (and I'm very confident that this condition is not working). Maybe this works with Sonoff Basic R3 or Sonoff RF R3, it has never been tested. -This tool is designed to work without internet connection so it hasn't got access to different firmwares than the 6.7.1 that is loaded onboard. \ No newline at end of file +This tool is designed to work without internet connection so it hasn't got access to different firmwares other than the 6.7.1 that is loaded onboard. \ No newline at end of file