fix nginx for php74 image

rootfs-php74/etc/nginx/nginx.conf

@@ -0,0 +1,107 @@
+# /etc/nginx/nginx.conf
+
+user nginx;
+
+# Set number of worker processes automatically based on number of CPU cores.
+worker_processes auto;
+
+# Enables the use of JIT for regular expressions to speed-up their processing.
+pcre_jit on;
+
+# Configures default error logger.
+error_log /var/log/nginx/error.log warn;
+
+# Includes files with directives to load dynamic modules.
+include /etc/nginx/modules/*.conf;
+
+# Uncomment to include files with config snippets into the root context.
+# NOTE: This will be enabled by default in Alpine 3.15.
+include /etc/nginx/conf.d/*.conf;
+
+events {
+        # The maximum number of simultaneous connections that can be opened by
+        # a worker process.
+        worker_connections 1024;
+}
+
+http {
+        # Includes mapping of file name extensions to MIME types of responses
+        # and defines the default type.
+        include /etc/nginx/mime.types;
+        default_type application/octet-stream;
+
+        # Name servers used to resolve names of upstream servers into addresses.
+        # It's also needed when using tcpsocket and udpsocket in Lua modules.
+        #resolver 1.1.1.1 1.0.0.1 2606:4700:4700::1111 2606:4700:4700::1001;
+
+        # Don't tell nginx version to the clients. Default is 'on'.
+        server_tokens off;
+
+        # Specifies the maximum accepted body size of a client request, as
+        # indicated by the request header Content-Length. If the stated content
+        # length is greater than this size, then the client receives the HTTP
+        # error code 413. Set to 0 to disable. Default is '1m'.
+        client_max_body_size 1m;
+
+        # Sendfile copies data between one FD and other from within the kernel,
+        # which is more efficient than read() + write(). Default is off.
+        sendfile on;
+
+        # Causes nginx to attempt to send its HTTP response head in one packet,
+        # instead of using partial frames. Default is 'off'.
+        tcp_nopush on;
+
+
+        # Enables the specified protocols. Default is TLSv1 TLSv1.1 TLSv1.2.
+        # TIP: If you're not obligated to support ancient clients, remove TLSv1.1.
+        ssl_protocols TLSv1.1 TLSv1.2 TLSv1.3;
+
+        # Path of the file with Diffie-Hellman parameters for EDH ciphers.
+        # TIP: Generate with: `openssl dhparam -out /etc/ssl/nginx/dh2048.pem 2048`
+        #ssl_dhparam /etc/ssl/nginx/dh2048.pem;
+
+        # Specifies that our cipher suits should be preferred over client ciphers.
+        # Default is 'off'.
+        ssl_prefer_server_ciphers on;
+
+        # Enables a shared SSL cache with size that can hold around 8000 sessions.
+        # Default is 'none'.
+        ssl_session_cache shared:SSL:2m;
+
+        # Specifies a time during which a client may reuse the session parameters.
+        # Default is '5m'.
+        ssl_session_timeout 1h;
+
+        # Disable TLS session tickets (they are insecure). Default is 'on'.
+        ssl_session_tickets off;
+
+
+        # Enable gzipping of responses.
+        #gzip on;
+
+        # Set the Vary HTTP header as defined in the RFC 2616. Default is 'off'.
+        gzip_vary on;
+
+
+        # Helper variable for proxying websockets.
+        map $http_upgrade $connection_upgrade {
+                default upgrade;
+                '' close;
+        }
+
+
+        # Specifies the main log format.
+        log_format main '$remote_addr - $remote_user [$time_local] "$request" '
+                        '$status $body_bytes_sent "$http_referer" '
+                        '"$http_user_agent" "$http_x_forwarded_for"';
+
+        # Sets the path, format, and configuration for a buffered log write.
+        access_log /var/log/nginx/access.log main;
+
+
+        # Includes virtual hosts configs.
+        include /etc/nginx/http.d/*.conf;
+}
+
+# TIP: Uncomment if you use stream module.
+#include /etc/nginx/stream.conf;

rootfs-php74/etc/ssh/sshd_config

@@ -0,0 +1,116 @@
+Include /etc/ssh/sshd_config.d/*.conf
+
+#       $OpenBSD: sshd_config,v 1.104 2021/07/02 05:11:21 dtucker Exp $
+
+# This is the sshd server system-wide configuration file.  See
+# sshd_config(5) for more information.
+
+# This sshd was compiled with PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
+
+# The strategy used for options in the default sshd_config shipped with
+# OpenSSH is to specify options with their default value where
+# possible, but leave them commented.  Uncommented options override the
+# default value.
+
+#Port 22
+#AddressFamily any
+#ListenAddress 0.0.0.0
+#ListenAddress ::
+
+#HostKey /etc/ssh/ssh_host_rsa_key
+#HostKey /etc/ssh/ssh_host_ecdsa_key
+#HostKey /etc/ssh/ssh_host_ed25519_key
+
+# Ciphers and keying
+#RekeyLimit default none
+
+# Logging
+#SyslogFacility AUTH
+#LogLevel INFO
+
+# Authentication:
+
+#LoginGraceTime 2m
+#PermitRootLogin prohibit-password
+#StrictModes yes
+#MaxAuthTries 6
+#MaxSessions 10
+
+#PubkeyAuthentication yes
+
+# The default is to check both .ssh/authorized_keys and .ssh/authorized_keys2
+# but this is overridden so installations will only check .ssh/authorized_keys
+AuthorizedKeysFile      .ssh/authorized_keys
+
+#AuthorizedPrincipalsFile none
+
+#AuthorizedKeysCommand none
+#AuthorizedKeysCommandUser nobody
+
+# For this to work you will also need host keys in /etc/ssh/ssh_known_hosts
+#HostbasedAuthentication no
+# Change to yes if you don't trust ~/.ssh/known_hosts for
+# HostbasedAuthentication
+#IgnoreUserKnownHosts no
+# Don't read the user's ~/.rhosts and ~/.shosts files
+#IgnoreRhosts yes
+
+# To disable tunneled clear text passwords, change to no here!
+#PasswordAuthentication yes
+#PermitEmptyPasswords no
+
+# Change to no to disable s/key passwords
+#KbdInteractiveAuthentication yes
+
+# Kerberos options
+#KerberosAuthentication no
+#KerberosOrLocalPasswd yes
+#KerberosTicketCleanup yes
+#KerberosGetAFSToken no
+
+# GSSAPI options
+#GSSAPIAuthentication no
+#GSSAPICleanupCredentials yes
+
+# Set this to 'yes' to enable PAM authentication, account processing,
+# and session processing. If this is enabled, PAM authentication will
+# be allowed through the KbdInteractiveAuthentication and
+# PasswordAuthentication.  Depending on your PAM configuration,
+# PAM authentication via KbdInteractiveAuthentication may bypass
+# the setting of "PermitRootLogin without-password".
+# If you just want the PAM account and session checks to run without
+# PAM authentication, then enable this but set PasswordAuthentication
+# and KbdInteractiveAuthentication to 'no'.
+#UsePAM no
+
+#AllowAgentForwarding yes
+# Feel free to re-enable these if your use case requires them.
+AllowTcpForwarding no
+GatewayPorts no
+X11Forwarding no
+#X11DisplayOffset 10
+#X11UseLocalhost yes
+#PermitTTY yes
+#PrintMotd yes
+#PrintLastLog yes
+#TCPKeepAlive yes
+#PermitUserEnvironment no
+#Compression delayed
+#ClientAliveInterval 0
+#ClientAliveCountMax 3
+#UseDNS no
+#PidFile /run/sshd.pid
+#MaxStartups 10:30:100
+#PermitTunnel no
+#ChrootDirectory none
+#VersionAddendum none
+
+# no default banner path
+#Banner none
+
+# Example of overriding settings on a per-user basis
+#Match User anoncvs
+#       X11Forwarding no
+#       AllowTcpForwarding no
+#       PermitTTY no
+#       ForceCommand cvs server